Project Vehicles

 

2013 Audi S4 3.0L Supercharged 7-speed Dual Clutch

OEM OPTIONS:

Recaro Leather and Alcantera seats front and back
Sport Differential
Fully Adjustable Audi Drive System
19" Peeler Rims with tires

 

POWER:

034 E40 ECU Upgrade
APR Ultracharger Throttle Body System
APR Dual Pulley Upgrade
Mertoc Headers - Swaintech Ceramic Coated
Killer Chiller
Jokerz Ported Supercharger
AEM Methanol / Water Injection
E40 gasoline
APR Carbon Fiber Intake
C&R Racing Heat Exchanger with auxiliary Lingenfelter Pump

 

TRANSMISSION:

034 TCU Upgrade
ECS Tuning Polyurethane Complete Drivetrain Insert Kit

 

SUSPENSION:

CR-15 Strut Brace
034 Motorsports Adjustable 25.4mm Rear Swaybar
Eurocode Alu Kreuz Billet Aluminum Drivetrain Stabilizer
ECSTuning Rear Brace

 

INTERIOR:

P3 Gauge with Track Package

 

EXTERIOR:

RS4 Mesh Style Front Grill
ECSTuning Front Diffuser
ECSTuning Rear Diffuser
Window Tinting

 

STEREO:
Pioneer TSW261D4 10" Subwoofer with mono amp

 

Supercharger inlet after porting

Headers after full Ceramic Coating

Stealth Engine bay. Hiding over 500hp. Sleepers are the best.

Custom dash button to activate electronic valves to use either the KillerChiller or Heat Exchanger, depending on the circumstances.

Constantly road testing and experimenting. This is the Killer Chiller with an auxiliary coolant tank under the radiator. Testing determined that it had a negative effect on temperatures so it was removed.

 

 

2003 Porsche Boxster S 3.4L 6-speed Manual

Power:

 

3.4L Variocam-Plus Engine Swap
IPD Intake Race Plenum
82mm GT3 Throttle Body
Mantis Sump Extention & Windage Tray
Plasmatio Underdrive Crank Pulley
Plasmatio Lightweight Power Steering Pulley
De-snorkel intake inlet
Borla exhaust
Delubozparts headers
Plasmatio Polyurethane Front Motor Mount
160 degree Thermostat

 

Transmission:

AASCO Aluminum Flywheel
Spec Stage II Lightweight Clutch & Pressure Plate
Wevo Solid Transmission Mounts
LED Shift Light

 

Suspension:

Bilstein PSS9 Adjustable Coilovers
Future Racing Technology short shifter
Goodyear F1 GS-D3 225/40/18 front tires
Goodyear F1 GS-D3 265/35/18 rear tires
Victor Equipment Chrome Turismo 18x8 front rims
Victor Equipment Chrome Turismo 18x9.5 rear rims
Schnell front strut tower brace
Schnell rear strut tower brace
Plasmatio Rear Subframe Brace
Hardrace Adjustable Rear Track Arms
Hardrace Adjustable Rear Toe Arms
Tarett Rear Lower Control Arm Monoball Bushings
Thrust Arm Bushing Kit
GT3 Brake Duct Spoilers
Stainless Steel Braided Brake Lines
Custom Alignment by Plasmatio: including steering rack shimming & corner balancing.

 

Interior:

Rennline Aluminum Track Mat
Rennline Aluminum pedal set
GT3 Shift Knob & Boot
GT3 Console Delete

 

Exterior:

HID Projector Headlights
Euro clear corners with LED's
LED tail lights
Clear third brake light
Chrome Exterior Badging
GT2 Front Bumper & Lip
Cayman S Spoiler
Rear Diffuser
Plasmatio Rear Bumperette Removal Plate

 

Stereo:

Pioneer AVIC-Z3 in-dash navigation unit
Kenwood KAC-8403 4-channel Amplifier
Kenwood KAC-8103D mono Amplifier
Pioneer TS-SW1041D 10" slim shallow-mount subwoofer
Custom-build fiberglass subwoofer box
Porsche Parts & Innovations rear speaker upgrade
Pioneer ND-BT1 Bluetooth adapter with integrated hands-free

 

 

Headers to replace stock manifolds and first set of cats. Car came with four cats on an exhaust that was only a few feet long.

 

Interior after countless changes(radio, console, shifter, sub box, pedals, etc.)

 

3.4L VarioCam+ engine swap with all the goodies.

 

Cayman spoiler, rear diffuser, and bumperette removal. Borla exhaust.

 

 

2000 Pontiac Grand Prix GTP 3800 Series II Supercharged with 4-Speed Automatic

Power:

Converted to Supercharged L67 / 4T65E-HD
zzperformance 3.4" Supercharger Pulley
zzperformance 1.9 Ratio Rockers
zzperformance Front Power Log
zzperformance Ported Rear Exhaust Manifold
zzperformance 3" Downpipe & Full Exhaust
Custom-Lightened zzperformance Water Pump Underdrive Pulley
Custom-Lightened zzperformance 10% Underdrive Alternator Pulley
Drilled 160 Degree Thermostat
Removed MAF Screen
Digital Wideband AFR UEGO Gauge
HPTuners Custom Tune
Removed EGR System
Custom Fender Cold-Air Intake
Custom Solid Motor Mounts
Traction Control by default is off
NGK TR6 spark plugs
MSD Super Conductor 8.5mm wires

 

Transmission:

Rebuilt with 3.29 GR

 

Suspension:

GM Performance 12" Front Brake Upgrade
GM Performance Koni Strut/Lowering Package
GM Performance Handling Upgrade Kit
Manual Fan Switch

 

Interior / Exterior:

LED's Under Door Handles
Muth LED turnsignals in side mirrors
40th Anniversary Roof Rails Painted Glossy Black
Disabled DRL's
Added Tail-lights to Alarm Flashing
Clear Turn Corners with LED's
Clear Tail Lights with LED's
Fast Toys Stainless Steel Exhaust Tips
Re-wired Headlights and foglights with relays

 

 

White gauges, added Heads-Up Display, gauges for Wideband O2 and Nitrous activation.

 

Upgraded to supercharged L67. Tubular front manifold shown.

 

Nitrous Setup with bottle heater. Also, rear strut tower brace from kit below.

 

PK12456148 Impala Police vehicle suspension upgrade kit. All pieces shown with hardware and bushins included. 100% bolt-on.

 

Factory BBK. From Monte Carlo. Replaces bracket from caliper to hub and requires the larger Monte Carlo brakes. Uses same pads

 

 

1986 Pontiac Fiero GT 2.8L 4-Speed Manual

Suspension:

KYB GR-2 rear struts converted to coilovers
KYB Gas-A-Just front shocks
Eibach 225# coilover springs
2000 Grand Prix 1 1/4" front swaybar on rear
Polyurethane rear swaybar bushings
Polyurethane front swaybar bushings
Darrel Morse solid Aluminum cradle bushings
Front battery mount with V8Archie fiberglass box
Rodney Dickman Lowering front ball joints
1 coil cut off front springs
Custom 12" Corvette brake conversion
Brembo cross-drilled / slotted Zinc-plated rotors
17x7 ultra-lightweight forged Centerline rims
225/45/17 Nitto Neo Gen tires
Front hood cowl to reduce radiator high-pressure area
Steel clutch pedal
Plasmatio Aluminum clutch pedal bushing
Plasmatio Custom short shifter

 

Interior / Exterior:

Complete Custom Interior
Custom Body Work and Fiberglass Pieces

 

 

Body work. Reverse hood scoop, rocker panels, side scoops, and custom front end.

 

Engine scoop, LED light conversion, and new rear bumper.

 

2000s Camaro dash conversion with a Firebird steering wheel to have a Pontiac airbag symbol.

 

Forged wheels with 1980s Corvette brake conversion.

 

Custom short shifter. Worked wonderfully being so simple.