Delrin Shifter Bushing Set for Manual Transmission Mopar

Delrin Shifter Bushing Set for Manual Transmission Mopar
Delrin Shifter Bushing Set for Manual Transmission Mopar
Delrin Shifter Bushing Set for Manual Transmission Mopar
Delrin Shifter Bushing Set for Manual Transmission Mopar

Delrin Shifter Bushing Set for Manual Transmission Mopar

Size
Regular price $25.00
/
Tax included. FREE Shipping on all orders over $25 to the continental US.
Standard shipping charges will apply to the rest of the world.

These Delrin bushings are for manual transmissions only.

 

Please check your vehicles stock rubber bushings to insure these will work. There are two slightly different versions of the stock bushings. Most new Mopar vehicles have all (4) bushings the same size. Some older vehicles use (3) small and (1) large bushing. The large bushing will be on the firewall side of the transmission, and are prone to deteriorating and causing shifting problems.

All (4) stock rubber bushings from Mopar are very soft, and after time, the under hood conditions will rip them apart, making it impossible to shift. The photo to the left shows the vast difference between the stock and Delrin bushings.

These bushings are made of Delrin (Acetal). The best way to describe Delrin is that it is a plastic that has the strength of metal. It is commonly used in place of metal in applications where metal can not be used (magnetic, corrosion, or conducting / insulating reasons). It is machined exactly like metal, and on the same equipment. This is much stiffer than Urethane bushings, and it will not give or wear out. With this mount, it should never need to be replaced, unlike the stock unit. Yet, it absorbs vibration better than metal.

These bushings give the vehicle more precision and "less sloppy" shifting. This set consists of four (4) bushings, along with e-clips to fit in the retaining ring, to prevent the bushings from sliding out. The four (4) bushings allow for replacing of not only the under hood bushings, but also the bushings on the shifter itself.

As shown on the left, the Mopar option of (1) larger bushing is very evident when one looks under the hood. The large bushing has a much larger outer diameter, even though it fits on the same size rod on the transmission.

Almost any item here can be customized to better fit your needs. Extra charges might be required, but we will try and figure out the best way to make it happen. Please contact us for details.


Shipping is FREE on all orders over $25 to the continental US.
Standard shipping charges will apply to the rest of the world.
More from Automotive
Rear Main Seal Installation Tool for Porsche
Rear Main Seal Installation Tool for Porsche
Rear Main Seal Installation Tool for Porsche
Plasmatio
$45.00
Aluminum Suspension Rear Brace for Porsche
Aluminum Suspension Rear Brace for Porsche
Aluminum Suspension Rear Brace for Porsche
Plasmatio
$115.00
Phenolic Intake Spacer for Camaro / Firebird L36 3800 Series II
Phenolic Intake Spacer for Camaro / Firebird L36 3800 Series II
Phenolic Intake Spacer for Camaro / Firebird L36 3800 Series II
Plasmatio
from $250.00
Jeep JK(U) Hard Top Quick Hand Screws
Jeep JK(U) Hard Top Quick Hand Screws
Jeep JK(U) Hard Top Quick Hand Screws
Plasmatio
$15.00
Jeep JK(U) Freedom Panel Wrench
Jeep JK(U) Freedom Panel Wrench
Jeep JK(U) Freedom Panel Wrench
Plasmatio
$20.00
Vinyl Audi B8 S4 Amber Corner Light Cover Set
Vinyl Audi B8 S4 Amber Corner Light Cover Set
Vinyl Audi B8 S4 Amber Corner Light Cover Set
Plasmatio
from $15.00
Recently viewed