Espaciador de cuerpo de acelerador fenólico para Mopar 3.0L 6G72

Phenolic Throttle Body Spacer for Mopar 3.0L 6G72
Phenolic Throttle Body Spacer for Mopar 3.0L 6G72

Espaciador de cuerpo de acelerador fenólico para Mopar 3.0L 6G72

Tamaño
Espesor
Precio habitual $45.00
/
Los gastos de envío se calculan en la pantalla de pagos.
Este espaciador viene en espesores de 1/4" a 1", en versiones de 46 mm y 52 mm. El cuerpo del acelerador de 52 mm venía de fábrica en las minivans de 3.0 L y, cuando se cambia en lugar del de 46 mm, ofrece un aumento de 6 hp.
This spacer works in the vehicles listed and helps reduce the heat of the air coming into the engine via reducing thermal conduction, by being a heat insulator. Engines get very hot and this heat transfers through all metal physically connected to it. These spacers can make a noticable difference in that heat transfer, allowing the incoming air to stay closer to ambient (or below in certain forced-induction setups ), since they are installed between the engines and parts of the intake.

Insulating spacers have been around for decades and are proven to help, as they block some of the extreme heat generated by the engine from the intake plenum/supercharger/throttle body to help provide a cooler and more consistent air temperature, which results in better power.

Modern engines run extremely hot for emmissions reasons and can greatly benefit from spacers. All of our spacers are now made out of Garolite G-11 (for superior chemical resistance and heat resistance / insulation), so the color will be light green as shipped. Beware of cheaper spacers than may not withstand the extreme conditions under the hood of modern vehicles or block as much heat transfer.

Since this spacer can fit many combinations (vehicles, makes, and engines), please verify that there will not be any clearance problems arising from moving intake or throttle body out the thickness of the spacer. The best decrease in temperatures will come from using the thickest spacer that the vehicle can fit.

Some spacers may cause alignment issues of other items on or around the engine. Please ensure that this spacer will not cause any issues before purchasing.

We recommend buying an extra stock gasket from your local parts store, and sandwiching the spacer between two stock gaskets. RTV or equivalent sealant can also be used (especially on narrow, thin spacers).

If you need a spacer not shown on the site, let us know and we can quote it for you.
Almost any item here can be customized to better fit your needs. Extra charges may apply, but we will do our best to make it happen. Please contact us for details.


Shipping is FREE on all orders over $35 to the continental US.
Standard shipping charges will apply to the rest of the world.
Más del Automotor
Rear Main Seal Installation Tool for Porsche
Rear Main Seal Installation Tool for Porsche
Herramienta de instalación del sello principal trasero para Porsche
Plasmatio
$45.00
Delrin Rear Motor Mount for Toyota 1MZ-FE
Delrin Rear Motor Mount for Toyota 1MZ-FE
Soporte de motor trasero Delrin para Toyota 1MZ-FE
Plasmatio
$80.00
Aluminum Suspension Rear Brace for Porsche
Aluminum Suspension Rear Brace for Porsche
Soporte trasero de suspensión de aluminio para Porsche
Plasmatio
$115.00
Audi / Porsche / VW Clutch Alignment Tool
Audi / Porsche / VW Clutch Alignment Tool
Herramienta de alineación de embrague Audi / Porsche / VW
Plasmatio
De $1.00
Jeep JK(U) Freedom Panel Wrench
Jeep JK(U) Freedom Panel Wrench
Llave de panel Freedom para Jeep JK(U)
Plasmatio
$25.00
Delrin Motor Mount Set for Yamaha V-Max
Delrin Motor Mount Set for Yamaha V-Max
Juego de soportes de motor Delrin para Yamaha V-Max
Plasmatio
$85.00
Visto recientemente