Jeu de bagues de changement de vitesse Delrin pour transmission manuelle Mopar

Delrin Shifter Bushing Set for Manual Transmission Mopar
Delrin Shifter Bushing Set for Manual Transmission Mopar
Delrin Shifter Bushing Set for Manual Transmission Mopar
Delrin Shifter Bushing Set for Manual Transmission Mopar

Jeu de bagues de changement de vitesse Delrin pour transmission manuelle Mopar

Taille
Prix régulier $25.00
/
Frais d'expédition calculés lors du passage à la caisse.
Ces bagues Delrin sont destinées aux transmissions manuelles uniquement.


Veuillez vérifier les bagues en caoutchouc de votre véhicule pour vous assurer qu'elles fonctionnent. Il existe deux versions légèrement différentes des bagues d'origine. La plupart des nouveaux véhicules Mopar ont tous les (4) coussinets de la même taille. Certains véhicules plus anciens utilisent (3) petites et (1) grandes bagues. La grande bague se trouvera du côté du pare-feu de la transmission et aura tendance à se détériorer et à causer des problèmes de changement de vitesse.

Toutes les (4) bagues en caoutchouc d'origine de Mopar sont très souples et, après un certain temps, les conditions sous le capot les déchirent, rendant impossible le déplacement. La photo de gauche montre la grande différence entre les bagues d'origine et Delrin.

Delrin (Acetal) motor mounts, transmission mounts, and bushings are each machined from a solid blocks, and have either Stainless Steel or Aluminum bushings fit into the mounts to act as a point of contact for the connecting bolts when required. Delrin is an extremely strong and stiff plastic. It is commonly used in place of metal in applications where metal can not be used (magnetic, corrosion, or conducting / insulating reasons). These are much stiffer than polyurethane mounts, and it will not give or wear out. Delrin mounts should never need to be replaced, unlike the stock units which are usually considered a wear item.

Delrin mounts minimize the jumping or twisting of the motor under the hood. This movement is caused by the rotating mass of the crankshaft and transmission components. With stock mounts, the engine will twist itself in the engine bay when the throttle is opened, or during high-speed shifts. Over time, this force will destroy the stock rubber mounts. When this happens, the rubber may split or rip, allowing the engine to potentially move inches back and forth. This can destroy CV joints, other mounts, and create wheel-hop.

With our mounts, shifts will be much crisper. While pressing the gas pedal, a vehicle is much more responsive; as the motor does not lose as much torque twisting into the mounts.

At a price usually less than that of inferior stock mounts, these are not only a great performance item, but a bargain for each application.

Almost any item here can be customized to better fit your needs. Extra charges may apply, but we will do our best to make it happen. Please contact us for details.


Shipping is FREE on all orders over $35 to the continental US.
Standard shipping charges will apply to the rest of the world.
Plus de Automobile
Rear Main Seal Installation Tool for Porsche
Rear Main Seal Installation Tool for Porsche
Outil d'installation de joint principal arrière pour Porsche
Plasmatio
$45.00
Delrin Rear Motor Mount for Toyota 1MZ-FE
Delrin Rear Motor Mount for Toyota 1MZ-FE
Support moteur arrière Delrin pour Toyota 1MZ-FE
Plasmatio
$80.00
Aluminum Suspension Rear Brace for Porsche
Aluminum Suspension Rear Brace for Porsche
Renfort arrière de suspension en aluminium pour Porsche
Plasmatio
$115.00
Audi / Porsche / VW Clutch Alignment Tool
Audi / Porsche / VW Clutch Alignment Tool
Outil d'alignement d'embrayage Audi / Porsche / VW
Plasmatio
À partir de $1.00
Delrin Motor Mount Set for Yamaha V-Max
Delrin Motor Mount Set for Yamaha V-Max
Kit de support moteur Delrin pour Yamaha V-Max
Plasmatio
$85.00
Jeep JK(U) Freedom Panel Wrench
Jeep JK(U) Freedom Panel Wrench
Clé à panneau Jeep JK(U) Freedom
Plasmatio
$25.00
Vu récemment